References

Project Management & Consulting, Development, Selling


Project Management & Consulting

Development Projects

Selling

 


Project Mangement & Consulting:

 

Project Management for the realisation of an IT-Project

Company: MWG Biotech AG, Ebersberg at Munich

The aim is the planning and realisation of an IT-Project. In close co-operation with the client, an interdisciplinary project team was established. The team engaged in carrying out the necessary analyses and planning. Project planning includes time scheduling, costs and the effective completion of the development and implementation. The project management also includes the compiling of problem definitions, controlling and leading of discussions.

Start of page     home

 

Project-related control for software development

Author of a program for the iurisdiction

The aim is to ensure on-time finalization of current and future development tasks. Consulting involves the definition of problems and the leading of discussions. Structures and basic conditions necessary for the project were compiled in co-operation with the persons involved with binding agreement afterwards.

Start of page     home

 

Process analysis for distance measurement between moving vehicles

Company: MEL microelectronics GmbH, Munich

Concept preparation for the development of prototypes and estimation of attainable measuring accuracy: Objective of the development project was the realization of a measuring system which gives the driver a warning signal as soon as the speed-dependent distance to the vehicle ahead falls below the permitted distance. The road conditions existing at the time of measurement are digitally displayed by means of a stereo-metrically operating camera. A computer then evaluates the images and computes the measured variables.

Start of page     home


Development Projects:

 

3D Data aqcuisition and evaluation

Company: MEL microelectronics GmbH, Munich

Within a manufacturing line for the automotive supply industry (Automotive) the soldered connections of a chip were to be examined. With the help of a 3D-Sensor of MEL the object data was determined. Suitable tools were to be implemented for graphic visualisation, and procedures had to be realised for the examination and evaluation. The synchronisation with the production line was effected through a parallel interface.

 

Ultra sound aminographie

Company: forST, Univ. Prof. Dr.-Ing. Schmitt-Thomas, TU Munich

Electromechanical completion of a test set-up and development of a program, which enables the realization of the measuring process for ultra sound aminography. This method is used for analyzing creep damage at thick-walled pipes. The speed of sound is measured in the material in that an ultra sound sender and a measuring head are moved through the measuring section. The position-controlled motors which are activated by relay maps are controlled via serial interfaces.

Start of page     home

 

Sound analysis for the quality control of ceramic bodies

Company: IST GmbH, Munich

Design, development and implementation of the software for a measuring system for the quality control of ceramic parts. This equipment serves to detect any non-homogeneity in particular internal separations such as cracks with a suitable measuring method. In the event of an impact, the ceramic body oscillates, while at the same time, a perceivable sound radiation is initiated. The frequency spectrum of this sound depends, apart from geometry of the body and the kind of suggestion on the density, the elastic module and the homogeneity of the material. It thereby provides information about existing disturbance, specifically about separations in the material. By means of a Fourier analysis, the received time signal is transformed into the frequency range. A learning process determines the statistic normal distribution of the frequencies, allowing the sorting into "good" or "bad" parts according to defined values.

Audio signal Frequenzspectrum and evaluation Audio signal and frequency spectrum with evaluation to the sound analysis
SONOR, program surface

Start of page     home

 

Base station & air interface test instrument for celluar radio system

Company: Willtek GmbH, Ismaning b. Munich

Design, development and implementation of the software for a measuring instrument which examines the functionality of base stations of cellular radio systems. The equipment is operated in a dialogue mode. The control unit communicates with the measuring system via a serial interface. The measuring data are displayed graphically and recorded on request. Protocol and configuration data can be transmitted from one PC to another. The implementation was executed by inclusion of external resources. Because of the tightly set targets, a thorough cost and resource planning as well as time schedule was required, complemented by the subsequent project supervision and control.

Acterna BAT-2700 test PAD Base station & air interface test instrument
Source: Willtek GmbH, Ismaning b. Munich

Start of page     home

 

GSM air interface, test module for the celluar radio system

Company: Willtek GmbH, Munich GmbH, Ismaning b. Munich

Design, development and implementation of a user program for the operation of a cellular radio test instrument, which measures the connection between base station and cellular phone in accordance with defined GSM protocols. The module is dialogue-controlled, whilst transmitted and received data are recorded. The test module communicates with the PC via two serial interfaces and consistently supplies measuring data reports, presented both as graphically and numerically.

Acterna GSM air interface test of modules 8501 GSM air interface, test of module, WWG MAM-8501
Source: Willtek GmbH, Ismaning b. Munich

Start of page     home

 

Analysis of wavers

Company: GeMeTec, Munich

Extension and maintenance of existing software in DOS (Borland Pascal) and MS Windows (MS Visual C++): The program controls systems for the analysis and treatment of silicon wafers for the semiconductor industry. The surface of a drop, which contains the impurities, becomes scanned along the x/y axis for each of the defined chemical elements. The measuring data are stored as 3D co-ordinates. The distribution of the intensity can be represented as a topographic map for each element. The maximum values are determined and used as new points of reference. Recording and control of the measurement data is effected via parallel and serial interfaces.

WSPS5 ELYMAT8 WSPS: Waver Surface preparation system, ELYMAT: Electrolytical Metal analysis Tool
Source: GeMetec. Munich

Start of page     home

 

Microscope control

Company: Carl Zeis Vision GmbH, Halbergmoos at Munich

Realization of dialogues as ATL object with interface interfaces in COM objects within an existing software system in MS Windows. The system serves as a comfortable control of microscopes for optical measuring techniques.

Start of page     home

 

Configuration tool for telecommunication systems

Company: Tenovis, Frankfurt, Stuttgart

Project management, realization and maintenance of a software system in MS Windows: The system, consisting of various programs, provides a tool for displaying and modifying configuration data of telecommunication systems. The data base system MS ACCESS, Dbase III and IV was used for the administration of the data. A compiler was to be developed as DLL under MS-VISUAL C++ using the MFC for interpreting text files and a "server", which performed the data exchange by using DDE telegrams, later as AktivX control member. An independent program for the configuration of the HW components in Microsoft Visual basic was implemented.

Start of page     home

 

Adaptable operating system

Company: Rhode & black,   Munich

Specification and development of software modules (object-oriented classes) according conceptional defaults and integration in the multitasking operating system IR MX (Intel). The control system provides a complete, real-time operating interface to the functional device-specific software. With the help of extensive configuration data, the operation processes and appearance are realized without the need for further additional programming.

Start of page     home

 

Fluorescence measuring position

Company: Bavarian geologic national office, Munich

Development and adjustment of software programs: The measuring position consists of a measuring system for the chemical spectrographic analysis of water samples, an automatic sample feed and an adaptable program for the evaluation of spectral processes (SPECTRA CALC). This software program to be developed additionally enables the interface control of the measuring instruments and organizes the automatic operational sequence of the measuring procedure and data administration.

Start of page     home

 

Measurement of geometrical sizes at rotation-symmetric parts

Company: OMT measuring technique, Munich

Optical measuring system for the non-contact measurement of geometrical sizes at rotation-symmetric parts: The outline of the test specimen is projected with a dissolution of some µm as shade picture on a line camera. With the help of the evaluation algorithms of "WKAgraf", the actual values are determined and afterwards compared with the desired values. Any deviations are corrected by the tools of the manufacturing centre lathe so that a closed automatic control loop is generated.

For the examination of the form & situation of tolerances of a cylindrical body, the form of its cross section is compared with a circle and the surface line is compared with a straight line. The center of the circle and the ascending gradient of the straight lines are included in the definition of a reference system and computed according to DIN ISO 5459, taking into account reconciliation, cladding or minimum condition.

Wave measuring position Wave measuring position for the non-contact measurement of rotation-symmetrischer parts
Source: OMT measuring technique, Munich

Start of page     home

 

Aluminium pane measurement

Company: Marius Jurca, Rodgau

Program system for the examination of aluminium panes: aluminium panes are thick punched panels, which are used for the production of tubes. The tolerance monitoring of the outside and internal diameter is crucial for the production process.

The aluminium pane to be measured is moved on a conveyor. With the aid of a highly soluble line camera, the outlines are recorded line by line. The computer system takes over the control, regulates the process and evaluates the measuring data by means of the evaluation algorithms of "WKAgraf". On the basis of the tolerances given in the "training mode" a qualitative evaluation of "good" or "bad" is effected. This signal "waste" is used for the controlling of a mechanical switch for segregating the bad parts.

Start of page     home

 

Eye background analyzer

Company: G. Rodenstock GmbH, Munich

The measuring system measures and quantifies the color and volume parameters of the papilla of the human eye background. A stereometric digital picture is taken centrically to the extended pupil of the eye. Because a set of parallel strips is simultaneously projected on the eye background, the depth profile can be calculated by correlation of the taken-up pair of pictures.

Depth profile Topografi representation Depth profile and topografische representation of the Papille of a human eye

 

Source: G. Rodenstock GmbH, Munich

Start of page     home


Selling:

 

Test systems for the quality control of ceramic bodies

Company: Ist GmbH, Munich

The test systems are developed and produced by IST GmbH. A contract for the distribution support was signed: Acquisition of the testing equipment of IST in the territory of the Federal Republic of Germany.

Start of page     home

Udo Marx, December 2003


Home

·

Profile

·

Consulting

·

Projectmanagement

·

Development

·

Sales

·

References

·

Partner

·

Tools

·

Contact